Feedback from VSI runfa at 2022/02/25
1. Trace port J1002 we'd better use standard mictor38 or CoreSight20 port that will convenient connect to DSTREAM debugger;
2. FEP and BEP trace port are reuse SPIBEPMEMS_XX pins, it seem current schematic not correct connet to trace port;
3. FEP and BEP trace port are reuse different pins, so we need use resistors or jumpers that can dynamic select which port connect to trace port, current design seem not do this design;
4. DS901 seem need add a resistor;
5. For USB2UART convert U801, we may need replace with one dual channel device that can support both FEP and BEP's UART ports, because latest design these two UART use different pads;
6. TPS628601 maximum output current seem just 0.6A, need confirm with SOC whether enough;