- or
No existing idea results
- ~ No ideas found ~
2687 results found
-
Update Newest update please thank you
Data Scanner for IMessages photos Location in everything else please thank you
1 vote -
canon printer setup
The first step to connect canon printer setup to WiFi is to locate the Wifi button on your printer. You can confirm the button by consulting the manual that came with your printer. Now, press and hold the Wifi button until the Wifi lamp begins to flash blue. Release the Wifi button after the Wifi lamp flashes twice. To begin the Canon printer wireless setup, go to your access point and press the WPS push button. As a result, the printer will begin to display the Connecting status, indicating that it is looking for your router. visit https://ijstartcannonn.com/canon-printer-setup/ to know more
The first step to connect canon printer setup to WiFi is to locate the Wifi button on your printer. You can confirm the button by consulting the manual that came with your printer. Now, press and hold the Wifi button until the Wifi lamp begins to flash blue. Release the Wifi button after the Wifi lamp flashes twice. To begin the Canon printer wireless setup, go to your access point and press the WPS push button. As a result, the printer will begin to display the Connecting status, indicating that it is looking for your router. visit https://ijstartcannonn.com/canon-printer-setup/ to know…
1 vote -
review and sign
Every time I send a document to sign. It always ask the client to review and sign. But that langue is extremely aggressive and literal losses me clients all the time. Because no one wants to push a button that says sign before even reading what's in the document.
Can you just change it to review.
Getting people to read a document is hard enough, I don't need a program giving them a built in excuse not to open it
1 vote -
Make "Look Up" select multiple words
When you select a multiple words on Adobe Reader DC and then right click it will only show a single word. Please see the picture.
1 vote -
Bug: Error opening PDFs on write protected media
Trying to open PDFs from write protected media (eg SD Card with write protection set) results in an error
"Adobe Acrobat Reader could not open <file>, file type is not supported or file is damaged"
(Translation from german message)This error shows up most times, on some PCs and also sometimes on same system doesn't.
There is no reproduceable logic behind it .Works normal once write protection is removed.
WIN10 64, Reader Version 2021.011.20039 64Bit
1 vote -
Digital Signatures
i need to have 2 different type of signature ie one drawn using personal name and one drawn using company name. Presently this is not allowed as one can only have one drawn signature per account.
there should be a feature to allow for multiple signatures in one account as different document requires different signature.
Am not sure why we are allowed to create namy digital signatures when one can only have one drawn signature at any one time.
please add this feature.
3 votes -
Bug: Incorrect display of bitonal images with color key masking
The attached PDF file contains a bitonal image which uses the DeviceGray color space, has a BitsPerComponent value of 1, and uses color key masking to make the white pixels transparent (via a Mask array).
The file contains a shipping label with a large X over the entire label, and the text "VOID" over the barcode. One of the lines forming the large X is under the image, and the other is above the image. The "VOID" text is under the label image.
Expected Result: The large X and the "VOID" text are fully visible at any window size, and remain visible both during and after window resize.
Actual Result: When the Acrobat Reader window is larger than a certain size, the image white color mask works correctly and the full X and "VOID" text are visible. But below a certain window size, as the window gets smaller, the full X and the "VOID" text are only visible during the window resize, and become invisible as soon as the window has finished resizing. Please see attached GIF of the window resizing. One of the lines in the X remains visible throughout, because it is not below the image, and thus is not affected by the broken color masking.
Environment: Adobe Acrobat Reader DC 2021.011.20039 on Windows 7
The attached PDF file contains a bitonal image which uses the DeviceGray color space, has a BitsPerComponent value of 1, and uses color key masking to make the white pixels transparent (via a Mask array).
The file contains a shipping label with a large X over the entire label, and the text "VOID" over the barcode. One of the lines forming the large X is under the image, and the other is above the image. The "VOID" text is under the label image.
Expected Result: The large X and the "VOID" text are fully visible at any window size, and…
1 vote -
AcroPDFImpl64.dll crashes when PDF is accessed via ActiveX/Webbrowser Control x64
Following bug has been introduced with a recent Adobe Reader (or Windows?) update. It affects all our customers.
Steps to reproduce:
1. Create a 64 Bit C# application (32 Bit Works)
2. In the application, use ActiveX, or WebBrowser control and open/navigate to "C:\documentname.pdf"Expected result: PDF shows up
Actual result: Screen stays gray. In the Windows Error Reporting you will see that AcroPDFImpl64.dll has crashed.
It is very important for us, because our customers rely on this functionality and our software product is currently not useable due to this bug.
Please contact me through email info at hickelsoft.de . Thank you very much!
Best regards,
Daniel Marschall
CEO of HickelSOFTName der fehlerhaften Anwendung: HsRunStarter.exe, Version: 8.0.0.0, Zeitstempel: 0x60d0a93a
Name des fehlerhaften Moduls: AcroPDFImpl64.dll_unloaded, Version: 21.5.20048.43252, Zeitstempel: 0x60b07ef8
Ausnahmecode: 0xc0000005
Fehleroffset: 0x0000000000059f39
ID des fehlerhaften Prozesses: 0x1b7c
Startzeit der fehlerhaften Anwendung: 0x01d7680d15d9e38e
Pfad der fehlerhaften Anwendung: D:\CORA2012\BAP\bin\HsRunStarter.exe
Pfad des fehlerhaften Moduls: AcroPDFImpl64.dll
Berichtskennung: 7672e4f7-7674-4f1e-80dd-a7b7e4a8415a
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Following bug has been introduced with a recent Adobe Reader (or Windows?) update. It affects all our customers.
Steps to reproduce:
1. Create a 64 Bit C# application (32 Bit Works)
2. In the application, use ActiveX, or WebBrowser control and open/navigate to "C:\documentname.pdf"Expected result: PDF shows up
Actual result: Screen stays gray. In the Windows Error Reporting you will see that AcroPDFImpl64.dll has crashed.
It is very important for us, because our customers rely on this functionality and our software product is currently not useable due to this bug.
Please contact me through email info at hickelsoft.de .…
3 votes -
Touchpad Jump page from 1 to 3 or 4
Having issue on Touchpad Scroll Down Page directly jump from page 1 to page 3 or 4, While Clicking on Clickpad scroll working fine.
Used Adobe XI and Adobe Reader DC most latest version but result remain same. Have make changes almost described in different post for page Dispaly settings, Preference->Accesibilty all possible settings done but scroll issue remain same. while touchpad working fine when page display setting make Enable Scrolling. Also working fine on Excel,Word,Chrome,
Windows 10 21H1 v 19043.1466
laptop HP Probook 450 G71 vote -
Fix Pan mouse option
When using the Pan mouse function, the mouse often selects text/images rather than panning. There is already a Select mouse option, when using Pan, you should not be able to select text as that's not what you're attempting to do.
1 vote -
"untagged document is read with assistive technology" window loads forever
Steps to reproduce the issue: When i have my screen reader (Fusion, ZoomText) on and want to open any pdf with adobe reader adobe reader freezes and cannot be used. even closing it does not work, it can only be done through task manager.
OS: Windows 10
Expected result: Programs runs and Screen reader reads the pdf.
Observed result: Adobe reader freezes and never comes alive again.1 vote -
How to Change the Ink in an WF 7720 Epson Printer?
When the ink begins to run low, it's time to refill or change the cartridge ink. This manual will help you on how you can change the ink in a WF 7720 Epson printer, and also it is recommended to do Epson WF-7720 troubleshooting to avoid further issues. In the beginning, start the printer and load some sheets into it. Then, using the knobs, carefully elevate the ink cartridge. Afterward, remove the plastic tape from the fresh ink cartridge. You will need to snap in the ink cartridge, as well as close the lid of the cartridge slot to keep the ink cartridge in place. The printer will automatically generate an alignment sheet when you replace the ink cartridges.
https://printeranswers.com/epson-7720-printer-driver/When the ink begins to run low, it's time to refill or change the cartridge ink. This manual will help you on how you can change the ink in a WF 7720 Epson printer, and also it is recommended to do Epson WF-7720 troubleshooting to avoid further issues. In the beginning, start the printer and load some sheets into it. Then, using the knobs, carefully elevate the ink cartridge. Afterward, remove the plastic tape from the fresh ink cartridge. You will need to snap in the ink cartridge, as well as close the lid of the cartridge slot to keep…
1 vote -
WHAT IS THE MINIMUM COST OF SMOOTHING HAIR?
In India, how much does a keratin cure cost?
Apart from follow-up treatments, keratin therapy in India might cost anything between Rs 4,000 and Rs 8,000, depending on the hair and period salon you choose.
https://www.vioz.in/
https://www.vioz.in/blog/vioz/what-is-the-minimum-cost-of-smoothing-hair/1 vote -
RdrCEF process to be stopped when Reader is closed
https://helpx.adobe.com/acrobat/kb/acrocef-rdrcef-errors.html provides admins a method to close RdrCEF process when Reader has problems working with digital signatures. Users are unable to stop this process and with this in mind, can Reader be developed so that it terminates this process periodically, as it tends to start up when Reader is launched. Please note that this process is either in background processes or as a child process of Adobe Acrobat Reader DC, which on Windows 10 makes it a little tricky to locate immediately. If user is unable to unload this process, then it prevents users being able to digitally sign PDF documents as the dialogs are not presented.
https://helpx.adobe.com/acrobat/kb/acrocef-rdrcef-errors.html provides admins a method to close RdrCEF process when Reader has problems working with digital signatures. Users are unable to stop this process and with this in mind, can Reader be developed so that it terminates this process periodically, as it tends to start up when Reader is launched. Please note that this process is either in background processes or as a child process of Adobe Acrobat Reader DC, which on Windows 10 makes it a little tricky to locate immediately. If user is unable to unload this process, then it prevents users being able to digitally sign PDF…
1 vote -
Build in an EPUB Reader and Allow for EPUB Embedding
The Reader app (all platforms) should be more generalized to allow "reading" of both EPUB or PDF documents.
Similarly, we should be able to embed an EPUB into a PDF file. (PDF has a robust method that allows it to embed other file formats.)
Then, we should have a switch in Reader that would let a user to switch from PDF to reflowable EPUB and back again.
While I understand that Adobe is investing heavily in Liquid Mode, this EPUB method would be far more reliable for people who need to control the design of both static and reflowable modes.
36 votesHi,
Thanks for reaching out to us for your concerns.
We have no immediate plans to work on this FeatureRequest.
We will let you know if this get prioritized for our Future versions.
Thanks
Ayush Jain -
Reader DC bug: It says my certified signature is invalid, because document was modified, even if I save the edited document before siging.
Reader DC bug: It says my certified signature is invalid, because document was modified, even if I save the edited document before signing. This problem was not happening on previous versions. It should only be considered modified, if I edit the document after signing.
1 vote -
Reader DC 2021.011.20039 uninstallation bug
We are working with SCCM/packaging and we discovered a problem when trying to uninstall latest Reader DC 2021.011.20039 from computers by command line. Uninstallation seems to be finished successfully (Reader DC is removed from Programs and Features) but the process "hangs" and never ends, which will cause SCCM or other install system to report it as still running/in progress and not report as success. Attached is a log file from one instance of this issue. We were able to reproduce it on several VMs.
1 vote -
Hand and Select tool Bug Report
Steps to reproduce the issue:
1) Open any PDF
2) Choose the hand tool (or select tool) from the toolbar user interface
3) Close the PDF (progam does not need to close)
4) Open the PDF again
5) Note which tool is now chosen (it is not the one you changed to)Environment: Windows 7
Expected result: The setting to be remembered after closing the program or PDF and opening the program or PDF again next time.
Observed result: Changing from select to hand or hand to select setting in the toolbar UI (Toolbar Item:->Select and Zoom Tools)
Working Function: There is a way to make Adobe Acrobat remember, 1) Open a PDF
2) Right-click in the open window
3) Make you choice (select or hand tool)
4) Close PDF
5) Open PDF again
6) Your setting will be the same as you chose before closing - SUCCESS :DBut this bug should be fixed so it is working with both methods.
Steps to reproduce the issue:
1) Open any PDF
2) Choose the hand tool (or select tool) from the toolbar user interface
3) Close the PDF (progam does not need to close)
4) Open the PDF again
5) Note which tool is now chosen (it is not the one you changed to)Environment: Windows 7
Expected result: The setting to be remembered after closing the program or PDF and opening the program or PDF again next time.
Observed result: Changing from select to hand or hand to select setting in the toolbar UI (Toolbar Item:->Select and Zoom Tools)
Working Function:…
2 votes -
print bug causes Adobe Reader to crash
There is a bug. When you want to print multiple sheets on one page and you select the customized amount and type in a zero in one of the two fields, the programm will crash when trying to generate the preview. (Version 2021.007.20099) On the older Version (2020.009.20063) of my old computer the programm generates a message, that the value must be between 1 and 99 and there is no crash
1 vote -
How to Install Epson WF-2750 Printer Scanner Driver?
With Epson's WorkForce WF-2750 printer, you can print, copy, and scan at an affordable price. Furthermore, it offers scanning and copying capabilities for home users and students who need an affordable, compact multifunction device for printing, copying, and scanning. But to get the printer to work properly, you need to download and install the printer scanner driver for Epson WF-2750. You can download the driver with the CD or manually. In this blog, we will have listed the steps for both processes.
First, download the installation file of the Epson WF-2750 driver by clicking the link in the recommended for you section.
When the setup file is completely downloaded, double click to run it.
Running the installation document will launch the setup wizard with the instructions. You need to follow these instructions one by one till the end.
Now, connect the USB cable between the Epson Workforce WF-2750 printer and your computer.
Then wait to catch the link of the printer into the computer. There'll be instructions to follow. Just do the instructions until the end.
Moreover, it is essential to check the ink cartridges before printing the documents.
Just ensure that you have entered all of the values before completing the installment procedure.
Now, verify w:https://printeranswers.com/epson-workforce-wf-2750-driver/hether the printer is working or not.
For More InfoWith Epson's WorkForce WF-2750 printer, you can print, copy, and scan at an affordable price. Furthermore, it offers scanning and copying capabilities for home users and students who need an affordable, compact multifunction device for printing, copying, and scanning. But to get the printer to work properly, you need to download and install the printer scanner driver for Epson WF-2750. You can download the driver with the CD or manually. In this blog, we will have listed the steps for both processes.
First, download the installation file of the Epson WF-2750 driver by clicking the link in the recommended for…
1 vote
- Don't see your idea?