- or
No existing idea results
- ~ No ideas found ~
13579 results found
-
Keyboard Shortcut
In new version of Acrobat, Shortcut Key Assigned for "Windows" as well as "Protect Using Password" is same i.e. Alt+F followed by W. This makes "Windows" access using keyboard difficult as it always triggers first instance i.e. "Protect Using Password". It will be better of shortcut keys are kept same to make navigation smooth for existing users.
4 votes -
Do not allow a fixed display size to be set in the Registry when the software is installed.
When Acrobat is initialized (or just now when a popup presents "new Acrobat" settings, for AI I believe), if the suggested settings are not accepted and the user goes in and selects a document display size, that size is fixed permanently for whenever a document is opened. This can't even be changed by going into general (global) Preferences in the software. This thus presents a problem that can only be resolved by deleting the preference setting key in the Registry and thus reinstall the master preferences. (Note that this happened to me today when an Adobe screen came up and asked me how I wanted the new/AI? Acrobat settings to be set and I chose 0.125 as display size, hoping I was setting 125%. All my documents would open tiny, and the Preference tab could not change this. All I could do was change the opening size preference document by document. This was not good. So, Adobe Support had to delete the Registry key and we started all over with the suggested settings.) Given this issue, a user should not be allowed to choose other than the suggested preference for display size.
When Acrobat is initialized (or just now when a popup presents "new Acrobat" settings, for AI I believe), if the suggested settings are not accepted and the user goes in and selects a document display size, that size is fixed permanently for whenever a document is opened. This can't even be changed by going into general (global) Preferences in the software. This thus presents a problem that can only be resolved by deleting the preference setting key in the Registry and thus reinstall the master preferences. (Note that this happened to me today when an Adobe screen came up and…
1 vote -
Initial page zoom
As a bifocal wearer, the default full-page display is RARELY suitable. I'd MUCH prefer that Adobe Reader pre-zoomed to a text readable level. I tend to end up at 150% zoom, but everyone's needs are unique, so accessibility personalization should be configurable. Maybe a simple default zoom setting or a smarter (AI?) learned one based on the size of the text in the current document.
1 vote -
How do I Change my Flight in Volaris Airlines?
In accordance with Volaris Airlines' flight change policy, travelers may modify their plans after making a reservation by calling +1 855 VOLARIS. For any questions you may have regarding Volaris Airlines, call the (OTA) Console Desk number if you are unable to reach the official number. You cannot change the destination country while changing the flight path. In the event that travel plans or itineraries change, customers can modify their flight prior to departure. The Volaris change flight policy should be known to them.
https://www.flyamericans.com/blog/volaris-airlines-flight-change
1 vote -
Invest in Noida's Future: Retail Shops for Sale!
Prime commercial shops available for purchase in high-traffic Noida locations. ️Be your own boss or secure a profitable investment. Don't miss out on this exciting opportunity! Limited shops remaining.
Contact Property Gully today!
Phone: 9582002006 or
Email: info@propertygully.com.
Visit Our Website: https://propertygully.com/retail-shops-in-noida/1 vote -
Ability to pin ALL TOOLS
Is it possible to pin All Tools so I don't have to keep opening it? So frustrating that the window closes! This new update requires so many clicks to do simple tasks, very irritating.
5 votes -
Faulty rendering of rotated images
Steps to reproduce the issue:
- In InDesign, create an A4 page with a full-page image rotated at an angle of about 2 degrees.
- Export PDF compatibility Acrobat 4, (PDF 1.3)
- Load into Adobe Acrobat.
The same error occurs on both Windows and MacOs.
For illustration I send screenshot: on the left image rendered by Apple Preview, on the right Adobe Acrobat.
Expected result: Adobe Acrobat will display the image without artifacts, just like Apple Preview.
3 votes -
Cannot print PDFs.
Adobe Acrobat Pro Continuous Release Version 2023.006.20360 on iMac running macOS Sonoma 14.0 will not print any PDFs. Error message is "There were no pages selected to print." User forum reports date back to 2015-2016 and don't work for me. This is a critical issue as I rely heavily on printed PDFs for many of my final products. Could it be compatitibility with Sonoma 14.0? Thank you.
3 votes -
Printing from PDF to multi page PDF forces margins
When generating a PDF from InDesign at 5.5" wide by 8.5" tall, the PDF comes out as expected with no borders. I can even tweak the PDF settings to display 2UP in the window just like I want it to print.
From Acrobat, taking that borderless PDF and selecting the Acobat PDF printer installed in Windows, the second you select Multiple pages in the printer settings window, Acrobat adds a margin around each page. Even when selecting letter, custom letter, custom 5.5x8.5.
If I wanted margins on my multi-page PDF output I would have built them into my document. There is no way to remove the margins and no way to make Acrobat do what I ask it to instead of what you developers think I need.
I want borderless 2UP pages in Acrobat with NO MARGINS. This honestly seems like it should be the default. Fix this bug please.
In fact, the notion that you can just add margins or shrink my content arbitrarily is such a problem with the way Adobe developers think. You have no idea what I want to do with this PDF, what gives you the right to add arbitrary margins to my content? It is really frustrating. Please fix this bug.
When generating a PDF from InDesign at 5.5" wide by 8.5" tall, the PDF comes out as expected with no borders. I can even tweak the PDF settings to display 2UP in the window just like I want it to print.
From Acrobat, taking that borderless PDF and selecting the Acobat PDF printer installed in Windows, the second you select Multiple pages in the printer settings window, Acrobat adds a margin around each page. Even when selecting letter, custom letter, custom 5.5x8.5.
If I wanted margins on my multi-page PDF output I would have built them into my document. There…
2 votes -
show current page number while dragging scroll bar
In the right side panel, Acrobat shows current and total page numbers. While holding the scroll bar and moving through a document, it is very helpful to see the current page number. This was the behavior in past versions of Acrobat. Currently, the page number field only updates when the scroll bar is released, leading to a guessing game when trying to scrub to a specific page.
8 votes -
Onscreen Ruler in Acrobat does not match distances measured by Measuring tool when using Custom resolution
Hi there! In Acrobat, the rulers used to change size based on the Custom Resolution setting. I'm not sure when this broke, but it's not working anymore. Now when you change the Custom Resolution setting, the ruler stays the same size and does not measure accurately, compared to the Measure tool which does measure accurately.
For an example, see the screenshot. In Preferences / Page Display / Resolution, the system setting is 111, but if I change it to 130 so that pages display larger at 100% resolution, the size of the ruler does not change. When I use the measure tool, it measures a length of 6.08 inches, but the onscreen ruler right next to it says that it is 7 inches.
Based on the document size, that 6.08 inches measurement is accurate and the 7 inches on the onscreen ruler is wrong. So that is a bug.
Next, a related feature request: For my screen, I really want to set the custom resolution to 112.5, so a physical ruler held up to the screen would give accurate measurements at 100% display size. Unfortunately, the Custom resolution field only takes integers. It would be great if I could use a decimal in that field.
Hi there! In Acrobat, the rulers used to change size based on the Custom Resolution setting. I'm not sure when this broke, but it's not working anymore. Now when you change the Custom Resolution setting, the ruler stays the same size and does not measure accurately, compared to the Measure tool which does measure accurately.
For an example, see the screenshot. In Preferences / Page Display / Resolution, the system setting is 111, but if I change it to 130 so that pages display larger at 100% resolution, the size of the ruler does not change. When I use the…
3 votes -
why cant i just open a file in adobe when i pay a high price subscription
pLEASE stop changing your program. I just want to open a file I receive change oredit and send it back . I want to do it the way IWANT IT / I pay a high subscription I deserve to use your program the way i did before YOU decide to change it.
3 votes -
Ability to insert text comment without the extra click on the toolbar
I used to be able to click on the spot of the text I wanted to add text, and I could just start typing; the comment would be created automatically; similarly, I could select text and just start typing for the replace text function. Now I have to make an extra click, on the toolbar menu. For manuscript editing, this adds annoying time.
10 votes -
paste in place whenever Forms (creating, edit...)
I was adding a created box and other elements to create a form; whenever I copied then wanted to paste in place an object the object jumped to a different area on the papers and not on the same page or area, so I was looking for the button/box...to find them select them with the mouse then move them around until arriving from a different page to the page where I need to place them in/...loss of time
1 vote -
overly scanned and photocopied documens
OCR needs to be standard in all PDF documents. If some documents have been scanned or photocopied multiple times and it's hard to identify the images or the text is hard to recognize with OCR, there should be a banner that says something like "We recommend you use a different copy of this document as it is no longer up to accessibility standards."
Jus to clarify teachers/professors who are transitioning their handouts to digital will often scan in their overly photocopied documents which are hard to make out the pictures and could be hard for OCR to identify text (not sure how OCR works when trying to identify text). Their are also annotations that make it hard for OCR to make out too.
OCR needs to be standard in all PDF documents. If some documents have been scanned or photocopied multiple times and it's hard to identify the images or the text is hard to recognize with OCR, there should be a banner that says something like "We recommend you use a different copy of this document as it is no longer up to accessibility standards."
Jus to clarify teachers/professors who are transitioning their handouts to digital will often scan in their overly photocopied documents which are hard to make out the pictures and could be hard for OCR to identify text…
1 vote -
Major dissapointment
I ABSOLUTELY do not like the new version of Acrobat Pro!!!!!!!!!! It is not user friendly at all!!!!!! Is there anyway to switch back to the old version? I use this program for my business on almost a daily basis. What used to take 5 minutes now takes me an hour just to find what used to be at my finger tips. PLEASE CHANGE IT BACK!!!!!!!
4 votes -
Request Signature Options
In the new 11/13/23 version of AdobeSign, I only have 2 options for recipients: sign or approve. There is NO option to add a cc. I went looking at your "help" and what it shows is a whole list of options, including cc. I think there is a bug that you need to fix. It wasted an hour of my time today trying to figure it out. I gave up and reverted to the old version. Thanks a lot.
3 votes -
Character encoding error
Adobe Acrobat Pro is having issues on conversions from MS Word to a PDF where it is combining characters into a single character. Most of the time it is the combination of lowercase "ti" when they show up together (e.g. Section, information, location). It functions properly in the source file of MS Word, but on the conversion Adobe combines the characters into a single character together and then doesn't recognize what character it is, throwing a Character Encoding Error. To fix you have to go into the editor, delete the combination character, and then retype the "ti" into the text editing box - which is a long process, plus you have to clean up the ADA tags afterwards on each edited text box as the editor tends to break them. Examples of the source document of a .docx that was EXPORTED to a PDF using the Adobe export engine. You can see everywhere it had the "ti" issue in the PDF.
Adobe Acrobat Pro is having issues on conversions from MS Word to a PDF where it is combining characters into a single character. Most of the time it is the combination of lowercase "ti" when they show up together (e.g. Section, information, location). It functions properly in the source file of MS Word, but on the conversion Adobe combines the characters into a single character together and then doesn't recognize what character it is, throwing a Character Encoding Error. To fix you have to go into the editor, delete the combination character, and then retype the "ti" into the text…
3 votes -
Pulldown menu missing for Export a PDF
This is BUG on the latest download of Adobe Acrobat Pro. There is NO pulldown menu when selecting "Export a PDF". There is a right arrow but no menu.
2 votes -
4 votes
- Don't see your idea?